1 www.pduke.com 2014/04/30 pds03w pdh03w series dc-dc converter 4:1 ultra wide input range up to 3 watts features applications ? no minimum load required ? up to 3000vdc input to output isolation ? small size and low profile 0.74 x 0.50 x 0.33 inch ? low output ripple and noise ? ul60950-1, en60950-1, & iec60950-1 safety approvals ? ce marked ? compliant to rohs ii & reach ? wireless network ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment 3000vdc isolation 1600vdc isolation remote control scp technical specification all specifications are typical at nominal input, ful l load and 25 otherwise noted input range output voltage output current @full load input current @ no load efficiency maximum capacitor load model number vdc vdc ma ma % f pds(h)03-12s3p3w 4.5 ~ 18 3.3 700 35 75 3300 pds(h)03-12s05w 4.5 ~ 18 5 600 35 81 1680 pds(h)03-12s09w 4.5 ~ 18 9 333 35 80 1000 pds(h)03-12s12w 4.5 ~ 18 12 250 35 82 820 pds(h)03-12s15w 4.5 ~ 18 15 200 35 82 680 pds(h)03-12d05w 4.5 ~ 18 5 300 40 79 1000 pds(h)03-12d12w 4.5 ~ 18 12 125 40 82 470 pds(h)03-12d15w 4.5 ~ 18 15 100 45 81 330 pds(h)03-24s3p3w 9 ~ 36 3.3 700 20 75 3300 pds(h)03-24s05w 9 ~ 36 5 600 20 80 1680 pds(h)03-24s09w 9 ~ 36 9 333 20 80 1000 pds(h)03-24s12w 9 ~ 36 12 250 20 82 820 pds(h)03-24s15w 9 ~ 36 15 200 20 82 680 pds(h)03-24d05w 9 ~ 36 5 300 20 79 1000 pds(h)03-24d12w 9 ~ 36 12 125 20 82 470 pds(h)03-24d15w 9 ~ 36 15 100 20 81 330 pds(h)03-48s3p3w 18 ~ 75 3.3 700 13 75 3300 pds(h)03-48s05w 18 ~ 75 5 600 13 80 1680 pds(h)03-48s09w 18 ~ 75 9 333 13 80 1000 pds(h)03-48s12w 18 ~ 75 12 250 13 83 820 pds(h)03-48s15w 18 ~ 75 15 200 13 82 680 pds(h)03-48d05w 18 ~ 75 5 300 13 79 1000 pds(h)03-48d12w 18 ~ 75 12 125 13 82 470 pds(h)03-48d15w 18 ~ 75 15 100 13 81 330
pds03w pdh03w 2 www.pduke.com 2014/04/30 part number structure pds03 - 48 s 05 w h series name input output output input isolation voltage quantity voltage range option (vdc) (vdc) pds : smd type 12: 4.5~18 s: single 3p3: 3.3 4 : 1 : standard type pdh : dip type 24: 9~36 05: 5 1600vdc isolation 48: 18~75 09: 9 h: 3000vdc isolation 12: 12 15: 15 d: dual 05: 5 12: 12 15: 15 input specifications parameter conditions min. typ. max. unit operating input voltage range 12vin(nom) 24vin(nom) 48vin(nom) 4.5 9 18 12 24 48 18 36 75 vdc start up time constant resistive load power up remote on/off 5 5 ms input surge voltage 1 second, max. 12vin(nom) 24vin(nom) 48vin(nom) 25 50 100 vdc input reflected ripple current 12vin(nom) 24vin(nom) 48vin(nom) 80 40 30 map-p input filter capacitor type dc-dc on open or high impedance remote on/off ctrl pin applied current via 1k dc-dc off 2 3 4 ma remote off input current 2.5 ma application circuit dc-dc on dc-dc off output specifications parameter conditions min. typ. max. unit voltage accuracy -1.0 +1.0 % line regulation low line to high line at full load -0.2 +0.2 % single -1.0 +1.0 no load to full load dual -1.0 +1.0 % 10% load to 100% full load single -0.5 +0.5 load regulation dual -0.8 +0.8 % cross regulation asymmetrical load 25%/100% fl dual -5.0 +5.0 % ripple and noise 20mhz bandwidth 30 mvp-p temperature coefficient -0.02 +0.02 %/ transient response recovery time 25% load step change 250 s short circuit protection continuous, automatics recovery
pds03w pdh03w 3 www.pduke.com 2014/04/30 general specifications parameter conditions min. typ. max. unit isolation voltage 1 minute input to output standard type 1600 suffix ?h? 3000 vdc isolation resistance 500vdc 1 g isolation capacitance standard type 50 suffix ?h? 50 pf switching frequency full load to minimum load 100 khz safety approvals ul60950-1 en60950-1 iec60950-1 weight 4.5g (0.16oz) mtbf mil-hdbk-217f 5.738 x 10 6 hrs environmental specifications parameter conditions min. typ. max. unit operating ambient temperature without derating with derating -40 +71 +71 +85 storage temperature range -55 +125 thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh lead-free reflow solder process ipc j-std-020d moisture sensitivity level msl ipc j-std-033b level 2a emc specifications parameter conditions level emi (1) en55022 class a class b esd en61000-4-2 air 8kv and contact 6kv perf. c riteria a radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (2) en61000-4-4 2kv perf. criteria a surge (2) en61000-4-5 1kv perf. criteria a conducted immunity en61000-4-6 10 vr.m.s perf. criteria a note: 1. the standard modules meet emi class a or class b with external components. for further information, please contact with p-duke. 2. an external input filter capacitor is required if t he module has to meet en61000-4-4, en61000-4-5. the filter capacitor power mate suggest: nippon che mi-con ky series, 220 f/100v. caution: this power module is not internally fused. an input line fuse must always be used. characteristic curve pds03-48s05w derating curve pds03-48s05w efficiency vs. input voltage pds03-48s05w efficiency vs. outp ut load
pds03w pdh03w 4 www.pduke.com 2014/04/30 mechanical drawing pds 03 pin connection pin single dual 1 -vin -vin 2 ctrl ctrl 6 nc common 7 nc -vout 8 +vout +vout 9 -vout common 14 +vin +vin 1. all dimensions in inch (mm) 2. tolerance :x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1) pdh 03
|
